Ruihui - Sheet feeder - MAC

MAC5

The 3 in 1 automatic feeding device that integrates feeding, straightening, and material shelf is high-tech, high precision, high efficiency, and has a particularly good effect on extra-long, extra-wide, and thick materials. It is unanimously considered an advanced automatic feeding device in the industry.

The 3 in 1 machine with uncoiler straightener and feeder is mainly used to straighten materials with a thickness of 0.8 to 9.0 mm. Generally, 9 rods are used for the rod system. Currently, the maximum width of the corresponding material is 2000 mm. The top of the roller is inclined upward at 20 degrees, which is convenient for cleaning the surface of the leveling roller, such as oil stains, waste chips, layers of rust from non-ferrous metals, etc. The stability is mainly used for stamping automobile parts.

Features and advantages

1. The MAC5 3 in 1 uncoiling straightening feeder is generally used in the auto parts industry. There are many first and second tier auto parts suppliers, and the maximum width is currently 2000 mm.
2. According to the thickness of the material, this model is generally equipped with a punch of 800T or more.
3. It is used for materials with a high tensile strength exceeding 613MPA.
4. This model can be customized with a leveling structure opening device; the elastic limit of the material can reach more than 613MPA.
5. It integrates uncoiling, leveling, feeding, and cutting into one, which is easy to operate and occupies a small area.
6. Adopts an imported servo system from Japan to ensure high precision feeding.
7. This machine model is entirely customized models.