Ruihui - Sheet feeder - MAC

MAC1

The MAC1 3-in-1 straightening and unrolling feeder consists of three functions: material shelving, leveling, and feeding in a single machine, saving space. Feeding, feeding, locking, folding, leveling, feeding, and changing are all performed by a single person. It can be completed through a point-controlled operation on an independent console, which saves a lot of work, effectively solving the problem of uncoordinated leveling and feeding and achieving high-speed leveling and feeding. At the same time, the overall appearance is strong and beautiful.

The machine adopts the bottom feeding method, which is suitable for punching, unrolling, and leveling the feeding of medium and thin plate coils with a thickness of 0.2 mm to 3.0 mm and a width of 50 mm to 400 mm. The pressure arm adopts pneumatic pressing to prevent the coil material from loosening and cooperates with the feeding pressure plate to flatten the material head so that the material can enter the machine smoothly.

Features and advantages

1. High precision: automated production can avoid manual operation errors, thus ensuring stable product quality.
2. High efficiency: the feeding can reach 18 meters per minute, which is 5 times faster than manual feeding, and it can operate 24 hours a day without interruption, improving production efficiency.
3. There are 11 leveling rollers, made of high-strength GCr15 bearing steel. After cooling and tempering treatment, high-frequency cooling, the surface hardness can reach HRC60-62 degrees after hard chrome plating, and the dimensional accuracy is 0.01 mm. The rigidity and surface finish of the leveling rollers ensure the surface properties of the material being leveled during the leveling process.
4. The material in the material frame is controlled by the photoelectric contrast below. The leveling feeder head can be leveled while the material is sent with the pre-set feeding length to the punching die. Instantly relax the material action, press down hard, and guide the material accurately.
5. The operation of each auxiliary device is powered by air or electricity, which is simple to operate and easy to maintain. After debugging, the error rate is low.
6. The feeding trolley device can be selected to save feeding time, improve work efficiency, save labor, and achieve the operation of a single person.